Product characteristics and precautions of sweeper

　　Sweeper plays an important role in conveyor. In operation, if the attachment of the tail roller is removed artificially, it is easy to cause serious casualties. And the sweeper has the characteristics of timely, convenient and fast removal of roller attachments.

　　In the process of installation and use, the sweeper often encounters maintenance problems, such as, the effect of the sweeper is not ideal, the unreasonable design leads to the rapid wear of the sweeper head, and the improper installation brings security risks.

　　The cleaning of belt sweeper is not good. The sweeper installed in some areas causes many safety accidents. It is often found that 7-8 sweepers are installed at a cleaning point, but the actual cleaning effect is poor. After the sweeper is installed in some areas, the belt joint cracks, resulting in the overall belt tearing problem. The production of these problems is caused by the following factors:

　　1. Selection error of sweeper

　　2. The cleaner is not installed in the right position

　　3. The sweeper blade is not wear resistant

　　The so-called type selection errors are mainly due to the failure to select the sweeper according to the specific industrial and mining conditions. For example, if the conveyor belt adopts a mechanical joint, the alloy sweeper cannot be installed; Herringbone belt must adopt roller cleaner and polyurethane cutter head, only suitable for

　　One way belt cleaning and other problems, two-stage cleaner using polyurethane cleaner can not meet the cleaning effect.

　　Sweeper manufacturers should provide the necessary technical support, such as scientific and effective analysis according to the on-site industrial and mining conditions provided by customers, accurate selection of sweepers, providing practical installation and fixation methods of sweepers, and providing effective solutions to problems.

• 上一篇：Principle of buffer bed
• 下一篇：没有了